Articles >>

Bore Evacuator

Category: Term of the day

Bore evacuator

A bore evacuator (also called a fume extractor) is a device on the gun barrel of an armoured fighting vehicle which helps prevent poisonous propellant gases from venting back into the vehicle's fighting compartment when the gun breech is opened to load another round.

Bore evacuators are most often used on large-calibre tank guns and self-propelled guns. Without bore evacuators, hot gases and other combustion residue leaks into the tank's interior, depleting oxygen levels and filling it with a foul odour that can easily induce nausea and distract the crewmen from their tasks. The evacuator is a reservoir that holds the super-heated, high-pressure propellant gases produced by the firing of a shell, then releases them as the shell exits the barrel. When not in use, the atmosphere inside the barrel remains the same as the surrounding environment; thus it is the same, or nearly so, inside the evacuator. As the shell passes through, an opening into the bore takes in the gases, containing them until the shell has exited, then releases them back into the barrel. The openings are angled toward the muzzle, so the stream of still fairly high pressure gas drags both combustion gas in the barrel and fresh air from the open breech toward the muzzle. This reduces the chances of these explosive propellants flowing backwards into the turret, causing combustion as they mingle with oxygen, though this can still happen if the evacuator is poorly designed, poorly maintained, or damaged.

Sergyi Way

Printable Version Send by email rss favorite Facebook Vkontakte Twitter Google+


At present you cannot leave messages. To be able to do this, you should enter by using your name. If you are not registetred, do it now. The registration procedure will take just one minute.